Tub Removal and Haul-Away
We disconnect the drain, pull the old tub, and haul it away the same day. The subfloor gets inspected for soft spots and water damage before anything new goes in.
Bathtub Remodeling Scottsdale AZ homeowners trust starts with proper waterproofing, not just pretty tile. We tear out failing caulk lines and moldy backer board, then rebuild your tub surround with cement board, a waterproofing membrane, and porcelain tile set to ANSI A118 standards. Whether you want a bathtub renovation in Scottsdale or a full tub-to-shower conversion, our crew handles plumbing, tile, and electrical under one licensed roof.

Bathtub Remodeling Scottsdale AZ is the process of removing or resurfacing an existing tub, repairing the wet wall behind it, and rebuilding the surround with waterproof materials and new fixtures. We pull the old tub, check the subfloor and framing for water damage, replace rotting cement backer board, and install a waterproofing membrane before any tile goes up. New PEX piping and a Moen or Delta shower valve usually go in at the same time.
Most Scottsdale homes built before 2005 are still running original builder-grade tubs with failing caulk lines and hard water stains that no amount of scrubbing fixes. If you are searching for bathtub renovation near me Scottsdale, the real question is whether your tub is worth saving. Cracked acrylic, soft spots in the floor, and recurring mold mean replacement, not refinishing. We give you a straight answer after a 20-minute inspection.
Every tub remodel we do covers the wet zone from the studs out. Here is what is standard, and what we quote separately if you want it.
We disconnect the drain, pull the old tub, and haul it away the same day. The subfloor gets inspected for soft spots and water damage before anything new goes in.
New cement backer board and a waterproofing membrane go on every wet wall. This is the step that prevents mold and mildew from coming back in two years.
We install a new Moen, Delta, or Kohler valve with a matching trim kit. Pressure and temperature get tested before the wall closes up.
Porcelain or ceramic tile set to ANSI A118 standards, finished with epoxy grout and silicone caulk at every change of plane. You pick the tile; we make it level.
We verify the exhaust fan moves air and the GFCI outlet trips correctly. If either fails, we replace it while the walls are open.
Debris gets hauled, floors get cleaned, and you walk the job with the lead installer. We do not leave until the punch list is signed off.
We inspect the tub, surround, subfloor, and plumbing for 20 to 30 minutes. You get a written scope the same day with a fixed price, not a vague range. We check for soft spots, moisture meter readings above 20%, and any sign of a shower pan leak behind the wall.
Day one is tear-out. We remove the old tub, tile, and backer board, then haul everything away. Floors and adjacent rooms get drop cloths and plastic sheeting. If we find rot or a cracked toilet flange, we show you photos before we proceed.
A licensed plumber swaps the shower valve, replaces corroded copper or galvanized pipe with PEX, and sets the new tub or shower pan. We sister any soft framing, install new cement backer board, and trowel on a waterproofing membrane with a notched trowel.
Porcelain or ceramic tile goes up with a laser level and grout float. We cut miters on a wet saw, set a Schluter edge profile, and grout with epoxy grout for stain resistance. A GFCI outlet and exhaust fan get wired before the walls close up.
We silicone caulk every joint, test the shower valve for temperature and pressure, and run the exhaust fan for 15 minutes. You walk the job with the lead installer, and we do not pack up until you sign off on the punch list. Typical turnaround is 5 to 8 working days.
We inspect the tub, surround, subfloor, and plumbing for 20 to 30 minutes. You get a written scope the same day with a fixed price, not a vague range. We check for soft spots, moisture meter readings above 20%, and any sign of a shower pan leak behind the wall.
Cuts porcelain and natural stone tile with clean edges for miters and around the valve and drain openings.
Reads moisture content in the subfloor and backer board so we know whether the wall is dry enough to close up.
Spreads thinset at consistent depth and presses grout into joints for full coverage and even lines.
Breaks loose old valve connections and clears clogged drains before the new tub or shower pan goes in.
Keeps tile courses level and locates framing for grab bar blocking and cabinet mounting.
Seals every change of plane with a flexible bead that will not crack when the house moves.

A 1998 North Scottsdale home had a cracked acrylic tub, a soft spot in the subfloor, and mold behind the caulk line. The shower valve was original and scalded when the toilet flushed.
After: We removed the tub, sistered the framing, installed a new pressure-balancing valve, and built a tiled shower with a linear drain and frameless glass. The room gained 10 inches of floor space and the job finished in 9 days.
Book this service →
An acrylic tub and surround were etched beyond cleaning. The grout was crumbling and the exhaust fan moved almost no air, so the ceiling stayed damp after every shower.
After: We refaced the surround with porcelain tile and epoxy grout, replaced the failing caulk lines, and installed a larger exhaust fan vented through the roof. The bathroom now dries out in under 15 minutes.
Book this service →
A 1970s condo had a cast iron tub with a failing drain and galvanized supply lines. The bathroom felt cramped and the tub was unusable for the owner's aging parent.
After: We pulled the tub, replaced the galvanized pipe with PEX, relocated the drain, and built a low-threshold shower with grab bar blocking and a frameless glass panel. The job took 11 days and meets ADA clearances.
Book this service →Most tub failures start small and stay hidden until the damage is expensive. These are the ones we see every week in Scottsdale.
Ask a pro →We strip the old caulk, replace the backer board, and rebuild the joints with epoxy grout and silicone caulk. The surround stops leaking at the source instead of getting another bead of caulk over the top.
We replace the tub with a porcelain or acrylic model rated for hard water, or reface the surround with porcelain tile and epoxy grout. Both surfaces wipe clean with a damp cloth and resist future staining.
We run a plumber's snake, inspect the pan with a moisture meter, and rebuild the drain assembly if needed. If the pan is compromised, we replace it and re-waterproof the entire shower floor.
We install a new pressure-balancing valve from Moen, Delta, or Grohe and replace corroded copper or galvanized pipe with PEX. You get steady temperature and strong pressure from the first shower.
Most tub remodels in Scottsdale run $3,500 to $9,500 in 2026, depending on whether you replace the tub, convert to a shower, or just reface the surround. A basic tile surround with a new valve sits near the low end. Moving plumbing or adding frameless glass pushes you higher. We give you a fixed written price after a 20-minute walkthrough.
Replace it if the tub flexes underfoot, has cracks, or sits over a soft subfloor. Refinishing makes sense when the shell is solid and you just want a new color. Refinishing costs $500 to $900 and lasts 3 to 5 years. A full replacement with new waterproofing runs $3,500 and up and lasts 15 to 20 years. We tell you which one your tub actually needs.
Plan on 5 to 8 working days for a standard tub replacement with a tile surround. A tub-to-shower conversion with a linear drain and frameless glass takes 8 to 12 days. We work straight through the week, and you get a daily update on what is happening next. Most homeowners are back to using the bathroom within a week.
Yes, if the tub shell is structurally sound. We can tile over a properly prepped surface, replace the valve through an access panel, and install a new surround without pulling the tub. That saves $1,200 to $2,500 in labor. If the subfloor is soft or the drain is leaking, the tub has to come out.
One call gets you a same-day walkthrough and a fixed written price. We are licensed, insured, and we show up when we say we will. Call now and we will tell you straight whether your tub needs a reface or a full replacement.
Get Free Estimate +18556124434 →Call +1 855-612-4434 or email info@scottsdalebathroomremodeling.com and we will get back to you the same business day. We answer the phone Monday through Friday, 8:00 to 18:00, and we schedule walkthroughs across Scottsdale and Maricopa County within a few days. Bring your wish list and your budget.